单级离心泵叶在干式状态下的模态分析及试验研究

王学谦,黄 思,张雪娇,邱光琦

PDF(1582 KB)
中国农村水利水电 ›› 2017 ›› (11) : 185-188.
泵站技术

单级离心泵叶在干式状态下的模态分析及试验研究

  • 王学谦,黄 思,张雪娇,邱光琦
作者信息 +

A Modal Analysis and Experimental Study of Single Stage Centrifugal Pump Impeller in a Dry State

  • WANG Xue-qian,HUANG Si,ZHANG Xue-jiao,QIU Guang-qi
Author information +
稿件信息 +

摘要

叶轮等动力机械部件在外部激励或自身动力作用下较易发生振动,为避免造成疲劳损伤或结构破坏等不良后果,深入分析其振动特性尤为重要。以干式状态下的 XA100 /32 型单级离心泵叶轮为研究对象,有机地结合 ANSYS Workbench 协同仿真平台、德国 BBM 振动测试分析系统和 LMS Test.lab 实验模态分析软件进行了仿真模态和试验模态分析,分别得到该叶轮自由状态下前六阶固有频率和振型,两种方法的固有频率相对误差基本在 10%以内。

Abstract

Power mechanical components such as impellers vibrate more easily under external excitation or self power. To avoid harmful consequences such as fatigue damage and structural damage,it is important to analyze its vibration characteristics deeply. In this paper,the impeller of XA100 /32 single stage centrifugal pump in a dry state is taken as the object of study,organically combining ANSYS Workbench collaborative simulation platform,the Germany BBM vibration test and analysis system and the LMS Test.lab experimental modal analysis software. The first six natural frequencies and vibration modes of the impeller are obtained by simulation and modal analysis respectively. The relative error of the inherent frequency of the two methods is basically less than 10%.

引用本文

导出引用
王学谦,黄 思,张雪娇,邱光琦. 单级离心泵叶在干式状态下的模态分析及试验研究[J].中国农村水利水电, 2017(11): 185-188
WANG Xue-qian,HUANG Si,ZHANG Xue-jiao,QIU Guang-qi. A Modal Analysis and Experimental Study of Single Stage Centrifugal Pump Impeller in a Dry State[J].China Rural Water and Hydropower, 2017(11): 185-188

参考文献

[1] 树 谦,文 德,物理工程,等. 振动结构模态分析: 理论,实验与应用[M]. 天津: 天津大学出版社,2001.[2] 梁 君,赵登峰. 模态分析方法综述[J]. 现代制造工程,2006,( 8) : 139-141.[3] Subramaniam L,Sendilvelan S. Modal analysis of a centrifugal pump impeller[J]. European Journal of Scientific Research,2012,79( 1) : 5-14.[4] Rad S Z. Finite element,modal testing and modal analysis of a radial flow impeller[J]. Iranian Journal of Science & Technology,Transaction B,Engineering,2005,29( B2) .[5] Luo T S,Dai R. Modal analysis of integrated radial inflow impeller with finite element method[J]. NeiranjiGongcheng ( Chin. Intern.Combust. Engine Eng.) ,2005,26( 1) : 77-80.[6] 徐建国. 轴流泵叶片应力与模态分析[D]. 江苏扬州: 扬州大学,2008.[7] 石永强,王维民,宁 喜,等. 离心压缩机叶轮振动特性仿真及试验研究[J]. 风机技术,2012,( 5) : 27-30.[8] 司乔瑞,余志顺,袁寿其,等. 带诱导轮高速离心泵流动诱导振动数值分析[J]. 振动与冲击,2013,32( 20) : 102-106.[9] 陈立明. 汽轮机叶片—轮盘耦合振动分析[D]. 北京: 北京工业大学,2005.[10] Larsen G C,Hansen M H,Baumgart A,et al. Modal analysis of wind turbine blades[R]. 2002.[11] Deines K,Marinone T,Schultz R,et al. Modal analysis and SHM investigation of CX-100 wind turbine blade[M]. Rotating Machinery,Structural Health Monitoring,Shock and Vibration,Volume 5.Springer New York,2011: 413-438.[12] Wang B T,Cheng D K. Modal analysis of mdof system by using free vibration response data only[J]. Journal of Sound and Vibration,2008,311( 3) : 737-755.[13] 黄 思. 流体机械数值仿真研究及应用[M]. 广州: 华南理工大学出版社,2015.
PDF(1582 KB)

362

访问

0

引用

详细情况

段落导航
相关文章

/